7 Reasons for Adapter’s Heating and Their Solutions

The adapter is a device that converts AC power 100V to DC voltage. A new type of adapter, however, has been drawing attention for its wasteful electric energy consumption. In this article, I will tell you about why the adaptor heats up and the solution to this problem as well.

1. Adapter Heats Up Due to Rotation of Magnetic Flux

Adapters convert AC power to DC power. The input side of the adapter is connected to a wall outlet, and the output terminals are connected to products such as laptops that require DC voltage. It can be said that, firstly, electricity runs through an electric circuit and then it is converted into DC voltage by passing through an electric transformer.

தீர்வு

In this case, it is normal, and you do not need to worry about anything. Things get escalated when the adapter starts overheating.

2. Adapter Heats up Due to Incompatibility Between Adapter and Product

As I mentioned above, the adapter converts AC power to DC power. However, not all adapters can convert 100V of AC power to DC voltage that a product requires for its proper use.

Therefore, compatibility is an important consideration when a person buys a new adaptor or a product overseas.

தீர்வு

In this case, you need to purchase an adaptor that is compatible with your product. There are many different types of adapters, so it may take some time for you to find the right one.

3. Adapter Heats up Due to Resistance in its Electric Circuit

I explained above that electricity runs through electric circuits and then converges into DC power. However, when the circuit is overloaded, there will be resistance. The larger the electric current, the hotter it becomes, and this causes overheating.

தீர்வு

In this case, you need to simply reduce the electric current on your circuit. This can be done by using an energy-saving bulb or turning off other electrical appliances that are connected to your product at the same time.

4. The Adapter Heats up Due to a Defective Product

If a product is defective, then it will cause overheating. It may also happen that the product works as usual, but the adaptor heats up due to a malfunction in its circuit.

தீர்வு

In this case, you need to check the electric circuits of both the product and the adaptor. If anyone of these needs to be replaced or repaired, then you have to do it

5. Adapter Heats up Due to Ripple Current

If you are using a device that becomes overactive, then it will cause overheating. This means that if your device is being used heavily, then it may heat up due to excessive electric current flowing through its DC circuit.

தீர்வு:

In this case, you need to turn off your device and wait for some time. Then, you can use it again after it has cooled down. If the problem persists, then you may need to send your laptop in for servicing or repair.

6. Adapters Heat Up Due to Restricted Air Flow Between the Adapter and the Product

It is normal for adapters to become warm after a long period of use. However, if the adapter heats up more than usual, then it becomes a serious problem. This can occur due to airflow being blocked between a product and an adaptor. The blocking elements could be your bed or your cushioned sofa etc.

தீர்வு

In this case, you need to place your device on a flat surface. This will help to prevent it from overheating. Also, you need to ensure that the adaptor is placed in a place with good ventilation. If this does not work, then you may have to purchase a new adapter or product.

7. Charging Cable Can Cause the Problem of Overheating

An electric circuit runs through a charging cable whenever it is connected to the power source. This makes the problem of overheating negligible when using a charging cable. However, in some cases, the charging cable is made of low-quality material, which makes it poor at conducting electricity. This results in the problem of overheating when you use certain types of charging cables.

தீர்வு:

In this case, make sure that you purchase a quality cable and connect it to a power source with low voltage (less than 100V). If this does not work, then you may need to send your device in for servicing or repair.

தீர்மானம்

As you can see, the problem of overheating is very common, and it affects different types of electronic devices. If your device starts to heat up more than usual, then there are many reasons that could be causing it. You just need to determine the root cause of this issue and then solve it accordingly. This will help you ensure that your product functions properly without overheating.